Casual Chic Linenwear Custom Manufacturing
What Surcharge Comes with Petite or Tall Linen Ranges?
Pricing & Minimums
What surcharge comes with petite or tall linen ranges?
There is no standard percentage. A petite or tall surcharge is a build-up of four cost lines, and a factory that quotes one number without breaking it down is guessing. The four lines are development (a separate block, grade table and fit sample), marker loss on a shorter or longer block, the fixed cost of a smaller production run, and separate labels, packing and inspection. In practice the surcharge is quoted as a one-off development fee plus a per-unit uplift, and at 60 pieces per style per colour the run-size effect usually dominates the other three.
The per-unit uplift commonly lands in the low single digits for a well-organised block and rises sharply when the block is small, when the fabric is narrow, or when the brand asks for a separate dye lot. The number that matters is not the percentage but whether each of the four lines is visible in the quote. This answer explains how the two lines are built, where they differ from the core block, what the minimums actually force, and how to read a surcharge line by line. The pattern logic behind the numbers is set out in our guide to grading, length and market demand for petite and tall linen.
MOQ 60 pcs per style per colour
Sampling 7-12 days
Bulk 25-35 days
Quote in 3-7 working days
What the Surcharge Actually Covers
Four cost lines account for almost every petite or tall premium we quote. They behave differently: two are one-off, one scales with fabric, and one scales with order size.
Pattern and grading
A second base block drafted at the petite or tall centre height, a separate vertical grade table, and at least one extra fit sample. This is a fixed cost per style, charged once and amortised across the block.
Marker and fabric
Shorter or longer pattern pieces nest differently on the lay. Small blocks can lose 2-5% more fabric at the marker, and fabric is 30-45% of unit cost on linen, so the loss is visible per garment.
Small-run absorption
Cutting setup, line changeover, bundling and inspection are spread over 60 pieces instead of 300. The fixed share of labour, which is 25-35% of unit cost, does not shrink with the order.
The fourth line sits inside packing: separate size labels, separate polybags, separate carton marks and a separate measurement report for the block. It is the smallest of the four, but it is the one buyers most often forget when they compare two quotes.
How the Two Lines Are Built
Petite and tall are built the same way, in opposite directions. The sequence below is the one we run from an approved tech pack, and it is the sequence that keeps the block from drifting across sizes.
1
Set the height band and the finished length. Decide the centre height (for example 5'2" for petite, 5'10" for tall) and the post-wash finished length for every style. Length is agreed before the pattern is drafted, not after.
2
Draft the base block. Apply fixed vertical deltas to the core block: body length, sleeve length, rise, waist position, bust point, armhole depth and shoulder slope. Horizontal measurements stay with the core size.
3
Build a separate grade table. Vertical increments change; horizontal increments do not. This is the step that prevents a range that fits at the centre and drifts at the ends.
4
Cut and fit the first sample. Fit on at least two wearers inside the height band, not on one house model. Record verdicts per checkpoint on a single sheet.
5
Wash and re-measure. Linen moves 3-7% in the first wash. Re-measure centre front, side seam and hem sweep, then correct the cutting length rather than the grade.
6
Lock the spec and cut bulk. Freeze the grade table, the measurement chart and the marker before bulk starts, and draw the inspection sample per block rather than pooled.
Two sample rounds is the normal budget for a first-time block. A third is only needed when the wash test changes the grainline or the shrinkage allowance, which happens most often on garment-washed linen. The tech pack fields that make this sequence possible are covered in our tech pack guide.
Where Petite and Tall Differ From the Core Block
The difference is not one number. A petite or tall block changes a set of vertical placements, and each placement has a range rather than a fixed value because the right number depends on the garment and the height band.
| Pattern point | Petite change | Tall change | Why it moves |
|---|---|---|---|
| Body length | -4 to -8 cm | +5 to +10 cm | Where the hem breaks on the leg |
| Sleeve length | -1.5 to -2.5 cm | +2 to +3.5 cm | Wrist bone position |
| Waist placement | -2 to -4 cm | +3 to +5 cm | Natural waist height |
| Bust point | -1.5 to -3 cm | +1.5 to +3 cm | Apex position relative to shoulder |
| Armhole depth | -0.5 to -1.5 cm | +0.5 to +1.5 cm | Torso length and movement room |
| Rise | -2 to -4 cm | +2 to +5 cm | Crotch height and seat depth |
| Grade per size (length) | 1.0-1.5 cm | 2.0-2.5 cm | Population height spread |
Ranges are working values, not a specification. The grade must be linear across the size run, and the wash allowance is applied after the finished length is agreed.
Because each point moves, the block cannot be produced by adding or subtracting a hem allowance at cutting. A cutting-room offset fixes the hem and leaves the waist, armhole and bust point where they were, which is why a hem-only range samples acceptably on one model and fails on customers.
What 60 Pieces per Block Means for the Quote
MOQ is 60 pieces per style per colour. A length block counts as its own style-colour block, so the order structure multiplies as soon as lengths and colours are combined. That multiplication is the main reason the same style can be cheap in core and expensive in petite.
| Range structure | Blocks | Units at 60 pcs | Effect on unit cost |
|---|---|---|---|
| Core only, 2 colours | 2 | 120 | Baseline |
| Core + tall, 2 colours | 4 | 240 | Development spread over one extra block |
| Core + petite + tall, 2 colours | 6 | 360 | Two extra blocks, two extra samples |
| Core + petite + tall, 4 colours | 12 | 720 | Marker and setup repeated per block |
A block is a pattern set with its own marker, sample and inspection record, not a size extension inside the core run.
Two consequences follow. First, a brand launching three lengths across four colours is committing to twelve blocks and 720 units at minimum, which is a working-capital decision before it is a design decision. Second, the thin end of the run is where the surcharge bites: the outer sizes in a petite or tall block sell slowly, so the first buy should be shallow there and deeper in the centre sizes. The same cost curve appears in our breakdown of plus-size pattern adjustments and fabric consumption, where the block moves in the other direction but the arithmetic behaves the same way.
How to Read a Surcharge Line in a Quote
A quote that says "petite +8%" is not wrong, but it is not checkable. Ask for the figure in two parts: a one-off development charge and a per-unit uplift, then test the per-unit number against the run size.
Illustrative arithmetic, not a price list. If a factory quotes development at a fixed amount for the extra block and samples, divide that amount by the units in the block. At 180 pieces a fixed charge of a few hundred dollars is a few dollars a unit; at 540 pieces the same charge is a fraction of that. The per-unit uplift that remains should then reflect marker loss and run size only. This is why the same block can be quoted at two different percentages for two different order quantities without either quote being dishonest.
Three questions expose most of the structure quickly. Is the pattern and grading cost charged once per style or once per season? Is the marker loss quoted as a fabric percentage or hidden inside the unit price? Are labels and cartons priced separately for the block? The answers tell you whether the surcharge is a real cost build-up or a margin line.
Checklist Before Accepting a Surcharge
Development charge itemised separately from unit price
Block size stated in pieces per style per colour
Marker loss quoted as a fabric percentage
Sample rounds included or priced explicitly
Separate labels and cartons priced or included
Fabric lot shared with the core line where possible
If any of the six is missing, the quote is incomplete rather than expensive. A complete quote can still be high, but you can see which line to negotiate. An incomplete quote cannot be compared with a second supplier at all.
Lead Times and Sampling
The extra block adds sampling time, not bulk time. Once the block is approved, bulk runs on the same line and the same calendar as the core style.
Initial replyWithin 48 hours of a complete enquiry
Full quote3-7 working days
Sampling7-12 days per round
Bulk25-35 days after approval
First order35-60 days including sampling
Sample fee$40-150, refundable on order
Swatches are free. Fabric stock covers 50+ specifications in the 100-260 GSM range, which is usually enough to place a petite or tall block without a custom weave, and that keeps the development charge to pattern work rather than fabric development.
One Block for the Range, or One Block per Style?
This decision changes the surcharge more than any negotiation. A petite or tall block can sometimes be shared across several styles, which spreads the development charge instead of repeating it. It can be shared safely only when the construction underneath the length is the same.
- Safe to share: the same armhole and sleeve construction, the same fabric weight band, the same waist treatment, and the same intended height band.
- Needs its own block: a drop shoulder next to a set-in sleeve, a different rise, a waist seam in one style and a straight cut in another, or a fabric weight that changes the drape by more than about 40 GSM.
- Needs its own sample but not its own block: a style that shares the block but changes the hem sweep, the pocket placement or the cuff depth.
A shared block is the cheapest route to a first range: one development charge covers several styles, and the grade table is validated once. The risk is that a shared block forces a compromise on the style that does not quite fit it, and a compromise in the block shows up as a fit return rather than as a pattern cost. The usual compromise is to share the block across two or three styles in the same fabric family and to accept a separate block only for the hero style.
For the quote, ask which styles share a block and whether the development charge is per block or per style. A supplier quoting per style when the block is shared is charging the same work twice, and that is the single easiest line to correct before the order is placed.
Where Buyers Lose Money
Three mistakes that cost more than the surcharge itself.
- Accepting a single percentage with no breakdown, then discovering the pattern cost is charged again next season.
- Applying one length delta to every style in the range, which produces a maxi that clears the floor and a shirt that still sits wrong at the waist.
- Splitting the block across a separate dye lot to save a week, then paying for a shade mismatch across the core, petite and tall sizes on ecru or sand.
The first mistake is commercial and reversible. The second is a pattern fault that repeats every season until the block is rebuilt. The third is invisible in a quote and visible on a shelf. None of them is solved by negotiating the percentage down; all three are solved by specifying the block properly before the quote is issued. The grade rules behind the block are set out in our guide to size grading for natural-fibre garments.
Need a quote for a petite or tall block?
Send the tech pack, the height band and the planned units per colour, and we will return a development charge and a per-unit price as separate lines within 3-7 working days, with an initial reply inside 48 hours. MOQ is 60 pieces per style per colour, sampling 7-12 days, bulk 25-35 days, and the sample fee of $40-150 is refundable against the order.
Request a quote Read more FAQsLinenwind is a Dongguan-based B2B linen garment factory with 20+ years of OEM and ODM experience. Production is ISO 9001, OEKO-TEX Standard 100 and SEDEX audited, inspected to AQL 2.5, and shipped in 25-35 days for bulk after an approved sample. Figures in this answer describe our standard terms and typical industry practice; every quote is confirmed against the actual tech pack and fabric lot.
